iPhone
7 battery repair and replacing at Home – Cell Phone Parts Canada:
Today, most of the people use iPhones as the trend of having the
iPhone is increasing day by day. Apple
iPhone has been recognized because of its Quality, Hardware, OS, and
Security and, of course of its high prices. Even iPhone demands people Thousands of Dollars, and it is still
one of the high demanding mobile phones
people use today. iPhone 7 is one of
the best-selling mobile phones from Apple, and even today, people love to use
the iPhone 7. But sometimes people face issues related to cell phone parts, especially battery issues with their mobile phones
and then they spent hundreds of dollars again for repairing mobile.
Today, we will show you how you can repair and replace your defective iPhone 7 battery at Home on your own. Or you can also visit Cell Phone Parts repair shop as we offer the
best parts, Samsung, HTC, Motorola, and iPhone parts and repair the mobile
phone at the best prices.
Here are the steps you can use to repair and
replace the battery of your iPhone 7 at Home with Cell Phone Parts Canada:
Step 1:
You need to back up all your mobile data
before the repair. And switch off your mobile
phone during the repair process.
You can switch off iPhone 7 by pressing Standby Button until the
"Switch off" slider appears.
Step 2:
You can use a pentalobe screwdriver to remove
the two pentalobe screws located to the left and right of the charging port.
Step 3:
The third step is to lift the display. You
can place the iPhone 7 to a clean and soft surface. So, the back of the mobile
phone will not hurt or save from scratches.
Since the screen display glued to the mobile
phone frame, you need to use the hairdryer. So, it will be easy to lift
the screen from the frame.
Step 4:
Then, you need to disconnect the battery contact. To do so, you need to
use a Y-type screwdriver and remove the screws and just lift the cover
carefully. Keep placing all the cell
phone parts at the common magnetic mat. You can now carefully lift the
battery contact. You need to use a plastic spudger and go under the plug
gently.
Step 5:
Now remove or disconnect the display and home
button contacts.
Step 6:
Now you need to lift off the cover by
removing Phillips screws and then disconnect the Facetime camera contact from frame/board carefully. Now, you can easily lift off the display
easily.
Step 7:
Now remove the Taptic Engine by unscrewing
the Phillips screws and use the spudger to disconnect the Taptic Engine
contact.
Step 8:
Remove the battery from your iPhone 7 attached to the enclosure by two adhesive strips. You can use
tweezers to detach them. Now remove battery carefully by holding adhesive
strips as flat as possible and at the phone's level.
Step 9:
Now, place a new battery in the same way as
the old battery was placed and center the adhesive strips at the back of the
new battery.
Step 10:
The next step is to install the Taptic
engine. You need to put Taptic Engine back between battery and lightning
connector in a similar way as it was before. Now again, fasten the Taptic
engine with three Phillips screws. And connect the engine with lightening
connector again.
Step 11:
Now put your iPhone 7 plastic cover back to the phone and protect it two
Phillips screws.
Step 12:
You need to attach the frame sticker now.
Remove all adhesive remains from the frame and the display. In this way, you
can fit the new adhesive frame properly. Now, attach the adhesive frame
gradually by removing the first protective film. And remove then remove the
remaining protective films. Keep in mind that the new adhesive frame on your
iPhone 7 would not be 100% waterproof after repair.
Step 13:
Now connect the Facetime contact with the
logic board by placing the display upfront on the frame. And set the display on
the side of the frame. Now you need to put the cover of Facetime back into
iPhone 7 by fixing it with two Phillips screws.
Step 14:
Reconnect the display and contacts of the
home button to the motherboard. Now
you should reconnect battery by attaching battering contact. And Put the cover
back in the iPhone by securing it with Y-type screws.
Step 15:
Now attach the display by putting the display
on the side of the frame and lower it on the iPhone 7. You need to push to the
display towards the wake button so that tabs click into place. And press the
whole display into the frame.
Step 16:
Now it's time to fasten the enclosure screws
to the left and rights of the lightning connector or in the simple charging port. And that's it. Now you
can set your iPhone 7 time and date and start using it normally again.
Congratulations, you learn how to repair and replace iPhone 7 battery
at Home.
If you feel not confident or you want to
repair and replace your iPhone 7 battery by someone who is professional in this
field. You are always welcome by Cell
Phone Parts, Canada. We not offer only battery repair and replacement, but
we have also large accessories and
parts for iPhone 5, iPhone 6, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus,
iPhone X, iPhone XR, iPhone XS, iPhone XS Max, IPads, IPods, Samsung S3, Samsung
S4, Samsung S5, Samsung S6, Samsung S6 Edge, Samsung S6 Edge Plus, Samsung S7, Samsung
S7 Edge, Samsung S8, Samsung S8 Plus, Samsung S9, Samsung S9 Plus, Samsung S10,
Samsung S10 Plus, Samsung Tablets, Samsung
Note Series, Samsung J Series, Samsung A-Series, LG Mobiles, Motorola Mobiles,
and many other models.
You can find all types of top quality tools and accessories from Cell Phone Parts at an affordable price
with Express delivery. You can either send your device to us for repair or you
can also come in person and visit our shop Cell Phone Parts Canada. If you need any further
information, you can visit our website: http://cellphonepartscanada.com/
Or Call
us at 1-866-943-0111.